Off Grid Power - Dimensions & Additional Information
Off-Grid Power Dimensions & Additional Information
Note: Measurements are provided in inches for reference; however, all products are manufactured to the nearest millimeter.
Power Plate — Dimension Breakdown
Mounting Plate Dimensions
|
Dimension / Specification |
Measurement / Details |
|
Width |
18" |
|
Height |
Varies depending on the camper configuration and required mounting space |
Component Dimensions
|
Component |
Length |
Height |
Depth |
|
1000W Inverter |
12" |
6.75" |
3" |
|
SmartSolar Charge Controller |
6" |
4.5" |
3" |
|
DC/DC Charger |
6.5" |
4.5" |
3.5" |
Anderson Connections
|
Connection |
Color |
Function |
|
DC/DC Charger Input |
Red |
Power input to the DC/DC charger |
|
Solar Charge Controller Input |
Red |
Power input to the solar charge controller |
|
Solar Charge Controller Output |
Gray |
Power output from the solar charge controller |
Additional Information:
- Includes 3 Anderson connections.
- DC/DC Charger connects to the Solar Charge Controller from behind the mounting plate.
- The DC/DC charger connection includes a male Anderson connector for the customer to complete the connection to the truck alternator.
- Connections to Lone Peak accessories will be completed at installation. Installation does not include electrical connections from camper to truck (DC/DC Connection to Alternator). Lone Peak is unable to complete this connection. Some of our Certified installers can, however, the installation is not covered by the shipping and installation fee paid to Lone Peak.
Included Wiring
|
Wire Connection |
Positive / Negative |
Wire Gauge |
Length |
Ring Terminals |
|
Battery to Inverter |
1 positive, 1 negative |
4 AWG |
1.9 meters |
5/16" |
|
Solar Charger to Battery |
1 positive, 1 negative |
8 AWG |
2 meters |
5/16" |
Additional Information:
- Both wire connections include 5/16" ring terminals for battery connections.
Product Manuals
|
Component |
Manual |
|
1000W Inverter |
|
|
SmartSolar Charge Controller |
|
|
DC/DC Charger |
Battery — Dimension Breakdown
|
Dimension / Specification |
Approx. Measurement |
|
Length |
10" |
|
Width |
6.5" |
|
Height (Including Terminals) |
8.25"–8.75" |
Battery Manual
200W Solar Panel — Specifications & Installation
Dimensions & General Specifications
|
Specification |
Measurement / Details |
|
Brand |
Sol-G |
|
Rated Wattage |
200W |
|
Maximum Power Output |
193W |
|
Length |
1,224 mm (48 in) |
|
Width |
888 mm (35 in) |
|
Panel Thickness |
2 mm (0.08 in) |
|
Weight |
3.5 kg (8 lbs) |
|
Solar Cell Type |
Monocrystalline Silicon |
|
Cell Configuration |
70 cells (14 × 5) |
|
Cell Size |
182 mm half-cell |
|
Cell Efficiency |
19.3% |
Electrical Specifications
|
Specification |
Rating |
|
Maximum Power Voltage (Vmp) |
19.9V |
|
Maximum Power Current (Imp) |
9.7A |
|
Open-Circuit Voltage (Voc) |
24V |
|
Maximum Power Output |
193W |
Mounting & Installation
- Mounting Strips: Panel is mounted on five 5 mm corrugated strips to create an airflow gap beneath the panel.
- Adhesive: Corrugated strips are adhered to both the camper and solar panel using double-sided 3M VHB adhesive tape.
- Airflow: The corrugated strips elevate the panel to allow airflow underneath.
Wiring Ports
Wiring Gland: One double-entry wiring gland port per panel for routing the solar panel wiring inside the camper. (passenger side)
Durability & Certifications
- IEC 61215:2016
- IEC 61730:2016
- UL 61730 (USA)
- PID (Potential Induced Degradation) rating

